Cobalt Cure will also stop the recurrence of spots economically when used as a maintenance product. No 2-bottle treatment! No more expensive ascorbic acid! No more draining!

Field tests by consumers and professional technicians show:

• Dramatic Performance
• Easy Preventive Maintenance
• Success on All Fiberglass and Acrylic Spas & Pools
• "Like New Results"

1. Turn off all pumps. Add a level cap of Cobalt Cure per 100 gallons of water.
2. Let stand until spots disappear.
3. Rebalance the pH to 7.8 using Easy pH Powder. Pumps may be turned on once pH is at least 7.2.
4. For prevention, add one cap of Cobalt Cure per 300 gallons every week. If spots start to reappear , increase to 2 caps per 300 gallons. Maintain a total alkalinity of 70ppm or lower.

1. Turn off all pumps. Add 2 gallons acid or 5 lbs. of Easy Acid per 15,000 gallons.
2. Add 2 bottles Cobalt Cure and brush. Let stand for 24 hours or until spots disappear. Total Alkalanity must get to 0. Add more acid if total alkalanity is not 0 after 24 hours.
3. Rebalance the pH to 7.8 using Easy Ph Powder. Pumps may be turned on once pH is at least 7.2.
4. For prevention, add once cap of Cobalt Cure per 3,000 gallons every week. If spots start to reappear, increase to 2 caps per 3,000 gallons. Maintain a total alkalanity of 70ppm or lower.

Pools:

• Add 2 gallons acid or 5 lbs. of Easy Acid per 15,000 gallons.

Spas:

• Add a level cap of Cobalt Cure per 100 gallons of water.

Uniquely formulated blend of proprietary ingredients.