Turbo Cell

The Turbo Cell is used with the Aqua Rite electronic chlorinator, Aqua Trol above-ground pool automation control, or the the Aqua Logic in-ground pool/spa automation control to generate fresh, pure chlorine to meet the pools sanitization needs.

The Turbo Cell can be installed vertically or horizontally in the pipe return pipe to the pool. Whenever the filter pump is operating, the Turbo Cell will be converting a low concentration of salt in the pool water into chlorine which is then evenly dispersed throughout the pool via the return jets. It couldn't be easier, more effective or trouble free.

Union connections (2") for easy installation. Use standard plumbing adaptors for 1" pipe; 50 mm unions also available. Model T-CELL-15 has fittings for both hose and return jet connections.

Cord with plug at the control end ensures that all electrical connections are protected from getting wet.

Standard cable length is 15 ft. (4.5m); cells with 25 ft. (7.6m) cables are also available.

Large diameter minimizes flow restrictions. Can be used on high flow systems required for in-floor cleaning or water features without the need for a bypass. See chart for flow vs pressure drop curve (as tested by NSF).

The Turbo Cell's offset design creates a turbulent flow pattern that maximizes the self cleaning performance.

This product can be used as a replacement cell for the following units:

• Blue Haven Pools: SmartPure Sanitizer and SmartPure Sanitizer II.
• BioGuard / BioLab / Chemtura : Mineral Springs
• Goldline Controls: Aqua Rite, Aqua Rite XL, Aqua Plus and Aqua Logic.
• Hayward Pool Products: SwimPure+, H-40 and HPC.
• Pebble Technology: NATURE SOFT.
• Splash Super Pools: SplashClear and SP-40TM.
• The LeverEdge: Guardian