SoftSwim Filter Cleaner

The single-most important specialty product for preventing cloudy water and allowing filters to operate at peak performance.

Uniquely formulated to work with any filter type, it helps remove particles specific to the SoftSwim chemistry.

It further allows for improved circulation and water clarity by removing dirt, oils and deposits from the filter.

• Effectively cleans all filter types
• pH <2
• Designed especially for use with SoftSwim
• Cleans filter media to allow more effective filtration
• Helps keep water clear by promoting better filtration

APPLICATION INSTRUCTIONS:

1. Read and follow label instruction and apply amount needed for filter size.
2. For sand filters, let sand soak with pump off for 12 to 24 hours, then backwash.
3. For cartridge filters, remove the cartridge and soak. Rinse thoroughly and allow to dry before replacing
4. For DE Filters, remove grids and soak in 1 qt. of product to 5 gallons of water or 2 qts of product to 10 gallons of water for large grid assemblies
5. Rinse thoroughly before replacing grids
6. Recharge filter with DE powder

Sand and Most D.E. Filters:

• 1 quart.

Non-Backwashable D.E. and Cartridge Filters:

• 1 quart for small filters, 2 quarts for large filters.

Specially formulated formula to cut through dirt and grease.

Use this product to clean your filter when on the Bioguard SoftSwim program.