This product is a highly effective algae preventative. It is recommended for use with pools with an attached spa or water features.

This non-foaming, non-staining formula works in chlorinated or brominated pools to inhibit stubborn algae growths.

• Excellent for use with pools with attached spas or fountains
• Treats stubborn algae growths in chlorine or bromine pools
• Non-foaming and non-staining
• Effective on all algae types
• Will not affect pH

• 60% polyquat
• pH ~6.5
• Prevents all types of algae
• Non-staining
• Non-foaming
• Ideal for use in pools with attached spas
• Optional Step 3 of the 3-Step and Once-a-Week 3-Step Programs.

Pre-Treatment Checklist

1. Ensure all equipment is working properly
2. Backwash the filter system following manufacturers directions.
3. Adjust the pH to between 7.2-7.6.
4. In chlorinated systems, add stabilizer to establish a minimum stabilizer level of 30-40 ppm to reduce the degradative effects of sunlight upon the chlorine residual.
5. Check for metals and if present add a stain and scale inhibitor to prevent staining of pool surface due to metals.
6. Adjust chlorine residual to 1-3 ppm.  When using other products as outlined in directions for this product, always follow directions on those products.

Pools containing heavy growth of algae should be cleaned prior to using this product.

1. For pools having light algae growth, pour the initial dose of 11-17 oz. per 10,000 gallons of water directly into pool.
2. Remove settled algae debris by cleaning.
3. For treatment of a freshly cleaned and filled pool, pour the initial dose of 6-11 oz. per 10,000 gallons of water directly into pool.
4. Additions of 2-4 oz. of this product per 10,000 gallons of water should be made every 5-7 days after initial treatment for maintenance.

**Wait at least 15 minutes after application before entering pool**

Light Algae Growth:

11-17 oz. per 10,000 gallons of water.

Initial Treatment of Clean Pools:

6-11 oz. per 10,000 gallons of water

Weekly Maintenance:

2-4 oz. per 10,000 gallons of water.

Poly [Oxyethylene  (Dimethylininio) ethylene (dimehylimino) ethelene dichloride] 60%
Other Ingredients 40%

 

This product is step 3 of Bioguard 3 step process. Use this product with a weekly shock treatment, and a daily chlorine treatment to ensure a clean sparkling pool. This product recommended for pools with attached spas or water fountains.