Applied Biochemists Silvertrine uses the power of elemental silver to quickly and effectively kill off tough black and mustard algae growth as well as algae slime. Its formula coats the floor and pool walls with a residual that continues to fight growth after treatment. The non-staining formula treats twice the volume of water as other silver algaecides, so you use half as much. Silvertrine is tasteless, odorless, and non-foaming at pool concentration. Best of all, Silvertrine is made by Applied Biochemists, a leader in bio-based pool chemicals, allowing you to buy with confidence.

Features:

• For the control and destruction of algae and algal slime

Compatible With:

• Chlorine and bromine sanitizers.

For Visible Algae Growth:

1. Clean Tile on Pool.
2. Backwash Filter.
3. Disconnect slide and automatice pool cleaner from pool support system.
4. Adjust pH to 7.2-7.4 range.
5. Raise chlorine residual to 3 ppm.
6. Wait 15 Minutes after adding chlorine
7. Add Silvertrine through skimmer at the rate of 8 oz. every 10 minutes until the recommended dosage of 8 oz. of Silvertrine per 10,000 gallons of pool water is reached. If pool has no skimmer, add Silvertrine below water level in front of return by squeezing at the same rate mentioned above.
8. Keep filter in operation during treatment and for a minimum of 72 hours after treatment.
9. For best results, keep filter in operation until condition clears.

Maintenance Application for Prevention treatment of non-visible algae:

For best results, perform maintenance application on a weekly basis.

1. Clean tile on pool.
2. Backwash filter.
3. Disconnect slide and automatic pool cleaner from pool support system
4. Adjust pH to 7.2-7.4 range.
5. Raise Chlorine residual to 3 ppm
6. Wait 15 minutes after adding chlorine.
7. Add Silvertrine at the rate of 4 oz. every 10 minutes until the recommended dossage of 4 oz of Silvertrine per 10,000 gallons of pool water is reached. If pool has no skimmer, add Silvertrine below water level in front of return by squeezing at the same rate mentioned above.
8. Keep filter in operation during treatment and for a minimum of 72 hours after treatment.
9. For best results, keep filter in operation until condition clears.

For Winterizing Before Freezing:

1. Clean tile on pool.
2. Backwash filter.
3. Disconnect slide and automatic pool cleaner from pool support system
4. Adjust pH to 7.2-7.4 range.
5. Raise Chlorine residual to 3 ppm
6. Wait 15 minutes after adding chlorine.
7. Add Silvertrine at the rate of 8 oz. every 10 minutes until the recommended dosage of 48 oz of Silvertrine per 10,000 gallons of pool water is reached. If pool has no skimmer, add Silvertrine below water level in front of return by squeezing at the same rate mentioned above.
8. Keep  filter in operation during treatment and for a minimum of 72 hours after treatment.

Visible Algae Growth:

• 8 oz. per 10,000 gallons

Weekly Maintenance:

• 4 oz. per 10,000 gallons

Winterization:

• 48 oz. per 10,000 gallons

Coiloidal Silver as Elemental     0.8%

Other Ingredients                       99.2%

Use this product to control and destroy algae and algae slime on pool floors and walls.

**Compatible with chlorine and bromine sanitizers only**